Accept Credit Cards

  Home > Brakes > Disc Brake Kits >

Disc Brake Kit Power 1967 - 1970

Price: $875.95
You'll earn 876 back in reward points! What's this?

Part #: 6523

This item is a kit and includes the following individual items:

Choose Your Transmission Type

Choose Your Year


Complete conversion kit. Year and transmission type specific.
*note for 1970 Mustangs*
  • 1970 kits include larger wheel bearings & races to fit 1970 spindles.
  • You will also need to reuse your existing spindle nuts and retainers.

Includes the following:

4 Piston Caliper
Caliper Brackets
Dust / Splash Shield Set
Rotors, slotted
Wheel bearing and Seals Kit
Wheel Bearing Grease (used for anti-squeak applications as well)
Hardware kit (bearing washers, spindle nuts, nut retainers, cotter pins, dust caps)
Front Caliper Bracket to Spindle Mounting Bolt Set
Caliper to caliper bracket mounting shoulder bolt set
Braided stainless steel disc brake hose set
Brake pad set
Adjustable proportioning valve with lines
Master cylinder and booster
Residual pressure valve
Brake pedal

Disc Brake Kit Installation Instructions (PDF, 7.73 MB)
Video Instructions

Average Rating: 4.5 of 5 Total Reviews: 15 Write a review »

  0 of 0 people found the following review helpful:
Pretty good February 22, 2017
Reviewer: Joshua Apperson from Miami , FL United States  
Over all the system went in with ease and fit together quite nicely, can be done with in a weekend if you have all the right tools.  Only problem i had was the female flare on the outlet side of the proportioning valve that connects to the reat drums had a pretty nasty gash and wouldn't let the line seat correctly which was a major pain in the butt

Was this review helpful to you?

  0 of 0 people found the following review helpful:
great kit October 18, 2016
Reviewer: Todd Cantrell from New Suffolk, NY United States  
very impressed at the completeness of the kit

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Great kit. I would recommend to a friend. July 2, 2016
Reviewer: Jeremy Hoeppner from Fishers, IN United States  
Instructions for installing the disc brakes and calipers were great and it bolted on easily.  I installed it on my 1970 Mustang and did have to reuse my original spindle nut, washer, and retainer as the spindles on the 70 are larger.  Larger diameter bearing were shipped with the kit.  I had to enlarge the hole on the clutch pedal spring bracket to install the new power disc pedal as the bolt was slightly larger than the existing hole.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Disc brake kit power 1968 coupe mustang June 26, 2016
Reviewer: Ben Edmondson from Clayton, IN United States  
All products are just perfect.  Better quality that one could hope for in this day and age.  Instructions okay for the disc brake installation but there were no instructions for the power boost installation.  This is s very difficult project.  Instructions should be added in my opinion.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
CSRP 67 Mustang Power and Front Barke kit June 13, 2016
Reviewer: jim campbell from Garden Grove, CA United States  
Customer Response from CSRP is poor. Called twice and email 3 times. No prompt response.
I have a defective part in the kit and can not get in contact with them to correct the problem.
Instruction could use many more picture to explain what they are talking about like attaching the hoe from fromt wheel to the new caliper.
Have not been able to see if they work waiting for response to my defective part request.

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Brakes > Disc Brake Kits