Engine Cylinder Head Bolt Set E-Series For 289 / 302 With Aluminum Heads 1964 1/2 - 1973 - Edelbrock

Engine Cylinder Head Bolt Set, E-Series, For 289 / 302, With Aluminum Heads

Edelbrock #85522 Head Bolt Kit is for 1963-96 S/B Ford 289/302 with Edelbrock 60217, 60219, 60225, 60229, 60249, 60255, 60259, 60319, 60329, 60349, 60359, 60367, 60369, 60379, 60389, 60399, 602479, & 602579. 7/16" Bolts with #9680 Bushings

Edelbrock E-Series Cylinder Head Bolt Kit #85522 is a high-quality set of bolts for use on Ford 289-302 blocks with standard 7/16-inch head bolt bosses. This E-Series kit is a perfect choice when upgrading to Edelbrock Performer or Performer RPM Cylinder Heads. This kit includes step-washers for use with aftermarket aluminum heads using -inch head bolt holes. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head.

SPECIFICATIONS:

• Part Type: Engine Cylinder Head Bolt Set
• Application: Application Specific
• UPC: 85347855223
• Quantity: Kit
• Thread Type: Coarse
• Thread Diameter: 0.4375 in
• Minimum Length: 2.50 in
• Warranty: 12 Months
• Features and Benefits: For Ford 289-302 with aluminum heads. Yield tensile strength of 190,000 PSI. Heat treating with rolled threads for superior form and strength. Black-oxide finish with sealer. Edelbrock “E” logo stamped on bolt head.
• Application Summary: Ford:Small-Block:289 (4.7L)-302 (5.0L)
• Installation Notes: The Edelbrock #85522 is made specifically for small block Ford V8; Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.- Using the torque sequence (See Figure 1), torque all 7/16" bolts to 65-70 ft./lbs and all 1/2" bolts to 100-110 ft./lbs in four steps (30, 40, 50, 60-75; or 30, 60, 90, 100-110). Installation is the same as for original equipment cylinder heads. Consult service manual for specific procedures, if necessary. BOSS 302 CLONE ENGINES - Use Edelbrock Head Bolt Bushings with Integral Washers #9680 in place of washers supplied with your head bolt kit. Torque 7/16" bolts to 65-70 ft./lbs. in four steps (30, 40, 50, 65-70) following the factory tightening sequence. ALL ENGINES - A re-torque is recommended after initial start-up and cool-down (allow 2-3 hours for adequate cooling).
• Finish: Black Oxide
• Length: (10) 2.50 in, (10) 4.00 in
• Material: Chromoly

FITMENT:

• 1964 1/2 - 1973 Mustang (see description & specs for more details)
• Compatible with a wide range of vehicles; please verify based on engine type as listed in the name/description/specs rather than year/make/model.

WARRANTY INFORMATION:

• Warranty Info

INSTRUCTION FILES:

• Instructions