Front Disc Brake Kit Dynapro 6 Piston 12.19in Rotors For 64-66 Mustang Ridetech TruTurn System 1964 1/2 - 1966 - Wilwood

Wilwood front Dynapro disc brake system for 1964 1/2 - 1966 Mustang with Ridetech spindles from Ridetech TruTurn system. Fits most 15 inch and larger wheels, however use diagram image for clearance.

We sell this kit to use with Ridetech spindles (TruTurn system). It fits many other GM vehicles which we have tried to list but please verify fitment before purchasing if not purchasing for 64-66 Mustang w/ Ridetech spindles

Brake System, Forged Dynapro 6 Big Brake, Front, 6 Piston Caliper, 12.190 in Drilled / Slotted Iron Rotor, Offset, Aluminum, GM A-Body / F-Body / X-Body 1964-72, Kit

DynaPro 6 forged billet calipers are combined with 12.19” diameter rotors for this group of traditional non-ABS spindles on American muscle cars and vintage rods. The enhanced brake capacity and pad performance of the six piston calipers provide an intermediate level alternative to the bigger six piston kits. These kits compliment wheel, tire, and suspension upgrades on all types of custom show and high performance street / strip machines. A full range of caliper finishes and rotor designs enable the builder to personalize the style and optimize the brake performance for each individual application.

We recommend purchasing a Wilwood Tandem master cylinder with this kit, 15/16 bore, part # 20538, 20539, or 20540.

We also sell a complete 4-wheel disc brake system for 64-66 Mustang w/ Ridetech TruTurn, including disc all around with necessary lines & parking brake cable. See part # DISC-BRK-RT-WW-64-66

SPECIFICATIONS:

• Product Line: Forged Dynapro 6 Big Brake
• Front/Rear: Front
• Inboard/Outboard: Outboard
• Hub Included: Yes
• Hub Offset: 0.19 in
• Rotor/Hat Construction: 2 Piece
• Rotor Hat Included: Yes
• Rotor Hat Color: Natural
• Rotor Hat Finish: Natural
• Rotor Hat Material: Aluminum
• Rotor Included: Yes
• Rotor Diameter: 12.19 in
• Rotor Thickness: 0.81 in
• Drilled Rotor: Yes
• Slotted Rotor: Yes
• Vented/Solid Rotor: Vented
• Rotor Material: Iron
• Rotor Color: Black
• Rotor Finish: Paint
• Caliper Included: Yes
• Caliper Piston Quantity: 6
• Caliper Material: Aluminum
• Caliper Finish: Powder Coat
• Brake Caliper Brackets Included: Yes
• Brake Caliper Bracket Material: Aluminum
• Brake Caliper Bracket Finish: Paint
• Brake Pads Included: Yes
• Brake Pad Compound: BP-10
• Wheel Studs Included: Yes
• Wheel Stud Thread: 1/2-20 in
• Wheel Stud Length: 1.75 in
• Wheel Bearings Included: Yes
• Brake Hoses Included: No
• Hardware Included: Yes
• Minimum Wheel Diameter: 15 in
• Wheel Bolt Pattern: 5 x 4.5 in | 5 x 4.75 in
• Quantity: Kit

FITMENT:

• 1964 1/2 - 1966 Mustang w/ Ridetech TruTurn System / Ridetech Spindles
• Various GM A-Body / F-Body / X-Body 1964-72, verify GM fitment before purchasing

IMPORTANT INSTALLATION NOTE: We sell this kit for work with 1964 1/2 - 1966 Mustang w/ Ridetech TruTurn system (Ridetech spindles). Also fits other GM applications, but please verify before purchasing for another fitment.