Electric Power Steering Conversion Kit 1969 - EPAS Performance

Electric Power Steering Kit for 69 Mustangs. Purchase with or without a pre-cut & pre-installed column in various finishes. If buying without a column, you must cut your original or existing steering column to install. Pre-cut columns are made by Ididit and will accept an original steering wheel.

Greatly reduce the steering effort with this electric-assisted steering kit.

INCLUDED IN KIT:
45 amp electric motor unit
Mounting hardware
Prewired control module

NOTES:
Features a low 9 amp draw
Average install time of 10 hours
Replaces Straight Shaft
Steering wheel not included

HOW IT WORKS:
The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer gives you control over the amount of assistance provided, allowing you to fine tune your EPAS experience. For example, you can have maximum power assist while on a parking lot, and less on the highway. The system is only active while turning.

SYSTEM CAN BE ADAPTED TO A RACK OR STEERING BOX:
However, for Steering Rack equipped vehicles you will need additional linkages.

NEED A STEERING COLUMN?
Check out our Ididit steering columns that are pre-cut and pre-modified to work with these kits and your original steering wheel (not available for 1970 models).

INSTALLATION INSTRUCTIONS: Click here, PDF