Complete Coil Over Suspension System Ft & Rr HQ Single Adj Shocks / Double Adj 4-Link / Hub Spindles 1964 1/2 - 1966 - Ridetech

Coil-Over System for 64-66 Mustang. Includes front and rear HQ Series Coil-Overs, front upper & lower StrongArms, TruTurn steering w/ Hub Spindles, Bolt-On Double Adjustable 4 Link and front MuscleBar.

Requires minimum 17 inch wheels & 2015-2023 Mustang brake systems. Mini-Starter required to clear TruTurn Centerlink Adapter (not Included, we recommend and carry Powermaster starters). These control arms are designed for use with the Ridetech CoilOvers and the MuscleBar swaybar. The factory shocks and springs or the factory sway bar will not fit these arms.

The Ridetech Coil-Over System for the 1964-1966 Mustang includes everything you need to give your vintage Mustang modern drivability. The package contains front upper and lower control arms, tall spindles, steering arms, inner & outer tie rods, front MuscleBar, a Bolt-In 4 Link System and 4 HQ Series Coil-Overs for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. Ridetech has spent hours collecting data to find a perfect spring rate and components for your vehicle’s performance and ride quality. Designed to lower your vehicle.

Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Billet cross shafts are included that feature a lowered mounting point to increase camber gain and correct suspension geometry. They house a stout double sheer lower shock mount.

Lower StrongArms feature a unique design that combines the control arm and strut rod into a stronger, more appealing 1 piece design.  Additional caster is designed into the arms and includes a robust bearing in an aluminum housing at the front mount to replace the soft factory rubber units.

“Hub” Spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-2023 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-2023 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17″ wheels. Hubs fit Ford car 5 x 4.5″ lug pattern and include 14mm studs.

HQ Series Coil-Overs utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty

Front MucleBar Sway Bar helps reduce body roll and includes the PosiLink end links that provide immediate engagement between the chassis and control arms. Includes billet aluminum frame straps (anodized black) and low friction bushings.

Bolt On 4-Link dramatically improves traction, handling, and ride quality. Installation does not require significant modifications to the floor pan and requires only minimal welding to the axle tube. Works with mini-tubs.  All links are double adjustable with R-Joint rod ends, which combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

This system is comprised of the following Ridetech part #'s. Kits may be customized by purchasing the individual components rather than the whole kit. Use the Ridetech part #'s below or our SKU number to purchase individually if needed. System components:

• 1 of Ridetech part # 12099598 - TruTurn Steering & Suspension Package With Hub Spindles
• 1 of Ridetech part # 12093510 - Coil Overs Front HQ Series For Ridetech Control Arms Pair
• 1 of Ridetech part # 12099100 - Front Sway Bar For Ridetech Control Arms
• 1 of Ridetech part # 12087197 - 4-Link System Bolt-On Double Adjustable
• 1 of Ridetech part # 12096510 - Coil Overs Rear HQ Series For Ridetech 4-Link Pair
• 1 of Ridetech part # 85000000 - Coil Over Spanner Wrench

FITMENT:

• 1964 Ford Mustang
• 1965 Ford Mustang
• 1966 Ford Mustang

IMPORTANT INSTALLATION NOTE: Requires minimum 17 inch wheels & 2015-2023 Mustang brake systems. Mini-Starter required to clear TruTurn Centerlink Adapter (not Included, we recommend and carry Powermaster starters). These control arms are designed for use with the Ridetech CoilOvers and the MuscleBar swaybar. The factory shocks and springs or the factory sway bar will not fit these arms.

INSTRUCTIONS: CLICK HERE

WARRANTY INFORMATION:

RideTech shock absorbers now have a 1,000,001 mile warranty! Ridetech is so confident of the performance and durability of their shock absorbers, they offer a 1,000,001 mile warranty. Applies to all RideTech shock absorbers purchased after Jan. 1, 2013. To enroll in the 1,000,001 mile warranty program, you will need to visit the Ridetech website after purchasing from Kentucky Mustang.

Please ensure you register your warranty within 30 days of purchasing from Kentucky Mustang. After that, if you ever have a shock failure in the next 1,000,001 miles, Ridetech will repair that shock free of charge.