Hood Scoop Kit Mach 1 1969 - 1970

Complete kit to install a Mach 1 hood scoop on your 1969 or 1970 Mustang. Fiberglass scoop like original.

NOTE: If installing lamps on a non-original hood scoop hood, two oval relief holes will need to be cut out of your hood for the lamp assemblies to sit down into.

NOTE: This includes the wiring harness under the hood with sockets that goes to the lamps themselves. It does NOT include the harness from the parking lights to this harness, as these are already installed on most cars. If needed, please add part # 5226 ("69 only). Almost all, if not all, '70 cars already have this wiring.

NOTE: This will require some prep-work to install. Lamps and wiring will have to be installed onto the scoop. Hood scoop will need to be prepped, drilled, and holes cut for the lamps assy (if not already there). Hood may need to be sanded & primed before painting.

Dimensions of scoop:

Length: 27-1/2"

Width: 15-1/2"

Height: 2-1/4"

Includes:
Hood Scoop Mach 1 Style
Hood Scoop Stud and Nuts
Hood Scoop Grill
Hood Scoop Seal
2 Hood Scoop Signal Lamps
Hood Scoop Turn Signal Wiring With Sockets
Hood Scoop Turn Lamps & Wiring Mounting Hardware and Looms
2 #1895 Bulbs for The Lamps