Throwout Bearing Hydraulic Cherry Bearing Kit for T-5 / TKO / TKX / T-56 1964 1/2 - 1973 - MalWood

Throwout Bearing, Hydraulic, Cherry Bearing Kit, Easy Bleed, Swivel Line Proprietary Design, Fits 3550 / T-56/T-56 Magnum / Tremec / Ford TKO / TKX / New World Class T-5, Kit

Swivel line proprietary design. Both pressure and bleeder lines swivel to make installation much easier.

Manufactured from high strength, extruded aluminum. Guaranteed for life never to break due to structural failure. Designed to withstand more than three times the normal operating pressure.

FEATURES:

• Proprietary, easy, bleed, technology
• Swivel line proprietary design, Both pressure and bleeder lines swivel to make installation much easier.
• Manufactured from high strength, extruded aluminum Guaranteed for life never to break due to structural failure.
• Designed to withstand more than three times the normal operating pressure
• The cherry Bearing piston has .800 inches of available travel. Low profile to fit into the tight spaces
• Precision aligned for less clutch wear, low drag hydraulics guarantee complete clutch engagement.
• Works perfectly with the “Under Dash Hydraulics” brand pedal systems, as well as most all master cylinders you will find on the market
• Included in your kit are 8 shims, two anti-spin studs both a bleeder line and pressure line with -3AN fittings & bleeder fitting, unless otherwise noted.
• Your cherry bearing will show up to you pre-bled from the factory, pressure, tested twice the normal operating pressure
• 45 mm angular contact, flat faced bearing
• New, Chromate plated, Bearing shield for corrosion and longevity. This is an industry exclusive.
• Packed with aerospace quality grease
• High quality, constant contact, railed, bearing for a long trouble free life.
• Available for a Chevy, Ford and Mopar cherry bearings
• USE ONLY : Dot 3 or dot 4 brake fluid recommended. No high temp or silicone, no synthetic. This will cause the components to break down over time.
• cherry bearings has cut no corners simply the best easiest to install & bleed on the market today.

INCLUDED IN YOUR KIT:

• HYDRAULIC RELEASE BEARING WITH 2 SWIVEL HYDRAULIC LINES & 1 BLEEDER FITTING
• 1 METRIC ANTI SPIN STUD
• 1 STANDARD ANTI SPIN STUD
• 10 SHIMS

SPECIFICATIONS:

• UOM: Kit
• Included: HYDRAULIC RELEASE BEARING WITH 2 SWIVEL HYDRAULIC LINES & 1 BLEEDER FITTING, 1 METRIC ANTI SPIN STUD, 1 STANDARD ANTI SPIN STUD, 10 SHIMS
• Product Type: Hydraulic Throwout Bearing

FITMENT:

• 1964 1/2 - 1973 Mustang with 3550, T-56/T-56 Magnum, Tremec, Ford TKO, TKX,& new world class T-5 transmission