Throwout Bearing Hydraulic Cherry Bearing Kit for Top Loader 1-1/4 Inch / T-10 / Short Shaft 1964 1/2 - 1970 - MalWood

Throwout Bearing, Hydraulic, Cherry Bearing Kit, Easy Bleed, Swivel Line Proprietary Design, Ford, Kit

Swivel line proprietary design. Both pressure and bleeder lines swivel to make installation much easier.

Manufactured from high strength, extruded aluminum. Guaranteed for life never to break due to structural failure. Designed to withstand more than three times the normal operating pressure.

FEATURES:
Proprietary easy-bleed technology
Swivel line proprietary design. Both pressure and bleeder lines swivel to make installation much easier.
Manufactured from high strength, extruded aluminum. Guaranteed for life never to break due to structural failure.
Designed to withstand more than three times the normal operating pressure.
The Cherry Bearing piston has .750 inches of available travel & is low profile to fit into the tight spaces.
Precision aligned for less clutch wear. Low drag hydraulics guarantee complete clutch engagement.
Works perfectly with the Malwood brand pedal systems, as well as most all master cylinders you will find on the market.
Included in this kit are 8 shims, two anti-spin studs, both a bleeder line and pressure line with -3AN fittings & bleeder fitting, unless otherwise noted.
Your cherry bearing will show up to you pre-bled from the factory & pressure tested to twice the normal operating pressure.
45 mm angular contact, flat faced bearing.
New chromate plated bearing shield for corrosion and longevity. This is an industry exclusive.
Packed with aerospace quality grease.
High quality, constant contact, & railed bearing for a long trouble free life.
USE ONLY : Dot 3 or dot 4 brake fluid. No high temp, silicone, or synthetic fluid. This will cause the components to break down over time.

INCLUDED IN YOUR KIT:

• HYDRAULIC RELEASE BEARING WITH 2 SWIVEL HYDRAULIC LINES & 1 BLEEDER FITTING
• 1 METRIC ANTI SPIN STUD
• 1 STANDARD ANTI SPIN STUD
• 8 SHIMS

SPECIFICATIONS:

• UOM: Kit
• Included: HYDRAULIC RELEASE BEARING WITH 2 SWIVEL HYDRAULIC LINES & 1 BLEEDER FITTING, 1 METRIC ANTI SPIN STUD, 1 STANDARD ANTI SPIN STUD, 8 SHIMS
• Product Type: Hydraulic Throwout Bearing

FITMENT:

• 1964 1/2 - 1970 Mustang fits Top Loader 1-1/4 inch, T-10, & short shaft transmissions